PKP-2300-SI-MT
PKP-2300-SI-MT brings together compact dimensions, advanced functionality and refined design in a next-generation CANbus keypad. Featuring four push buttons with replaceable icon inserts and two push-enabled rotary encoders, it also offers four additional analog and digital inputs for direct connection of 5V sensors to the CANbus network. Its efficient layout helps reduce dashboard space requirements while increasing control versatility. With IP67/IP69K protection, it is designed to perform reliably in harsh working conditions.
SHOP NOWSOFTWARE FEATURES
Assign any valid CAN address to the keypad.
Keypads no longer have to be pre-programmed to a specific address. This enables customers that work in applications in the field without access to a GUI to use any replacement keypad on-hand. The keypad can be configured to automatically announce its address and accept a new address assignment as appropriate.
The keypad can send messages to the BUS indicating a button press or a button release event has occurred. This confirmation allows digital systems to have the same input acknowledgements as that of the latching position of a mechanical switch.
The keypad sends a continuous broadcast of messages indicating the press or release status of each button at that instance. The frequency of these messages can be adjusted in a wide range.
The keypad sends a continuous broadcast of messages indicating it is functioning correctly. The frequency of these messages can be adjusted in a wide range.
Fully compliant with Device Profile 401d.
HARDWARE FEATURES
SPECIFICATIONS FOR STANDARD KEYPADS
ELECTRICAL
| Supply Voltage | 12-24Vdc Nominal (8-32VDC) |
| Standby Current | <50 mA |
| Communication BUS | CANopen, J1939 |
MECHANICAL
| Connector | Deutsch DT04-4P + Molex 39-01-3069 |
| Switch Life | 3 million operations |
| Mounting Studs | #10-32 Stainless Steel |
| Keypad | Silicone rubber with polyurethane hardcoat |
| PC Board | 1,6mm thick, Nema Grade FR-4, double clad with 1oz copper |
| Operating Temperature | -40°C to +70°C |
| Storage Temperature | -40°C to +85°C |
| Thermal Shock | -40°C to +85°C According to table 2 of ISO16750-4 |
| Mechanical Shock Test | IEC 60068 2-27 3-axis X,Y,Z 50Gs 11ms |
| UV Protection | UVB 400 hours |
| Salt Spray | Per ASTMB117 |
| Ingress protection Rating | IP67/IP69K |
| Weight | 160 gr (Inserts excluded) |
