PK24
With 8 keys in less than 60 cm2 and an attractive design, the PK24 is an extremely compact keypad that guarantees high button density and uncompromising design. The IP67 protection rating makes it perfect for outdoor installations as well. In addition to the icons for each button, it is possible to configure the color and number (from 0 to 3) of the RGB LED points present on each button.
SHOP NOWSOFTWARE FEATURES
Assign any valid CAN address to the keypad.
Fully compliant with Device Profile 401d.
Keypads no longer have to be pre-programmed to a specific address. This enables customers that work in applications in the field without access to a GUI to use any replacement keypad on-hand. The keypad can be configured to automatically announce its address and accept a new address assignment as appropriate.
The keypad can send messages to the BUS indicating a button press or a button release event has occurred. This confirmation allows digital systems to have the same input acknowledgements as that of the latching position of a mechanical switch.
The keypad sends a continuous broadcast of messages indicating the press or release status of each button at that instance. The frequency of these messages can be adjusted in a wide range.
The keypad sends a continuous broadcast of messages indicating it is functioning correctly. The frequency of these messages can be adjusted in a wide range.
Each light spot consists of three different colored LEDs (RGB). In this way it is possible to independently adjust color and intensity gradient of light spots.
HARDWARE FEATURES
SPECIFICATIONS FOR STANDARD KEYPADS
ELECTRICAL
| Supply Voltage | 12-24Vdc Nominal (8-32VDC) |
| Standby Current | <50 mA |
| Communication BUS | CANopen, J1939 |
| MTBF | 142106 hours (in accordance with MIL-HDBK-217 – operating environment ground mobile) |
MECHANICAL
| Connector | Deutsch DT04-4P |
| Switch Life | 3 million operations |
| Mechanical Shock | X, Y, Z 50Gs 11ms |
| Vibration | X, Y, Z 10 – 150Hz 0.15mm amp |
| Mounting Studs | #10-32 Steel |
| Materials | Silicone rubber with polyurethane hardcoat |
| PC Board | 1,6mm thick, Nema Grade FR-4, double clad with 1oz copper |
| Operating Temperature | -40°C to +70°C |
| Storage Temperature | -40°C to +85°C |
| Thermal Shock | -40°C to +85°C According to table 2 of ISO16750-4 |
| Humidity | 0 to 98% (no condensation) |
| UV Protection | UVB 400 hours |
| Salt Spray | Per ASTMB117 |
| Chemical Resistance | Deet, Engine Cleaner, Isopropyl Alcohol, Suntan Lotion, Multi-Purpose Cleaner, Orange Citrus Cleaner, Muriatic Acid |
| Ingress protection Rating | IP67/IP69K |
| Weight | 110 gr |
