PowerCore

If you need a PME with high amperage sealed in a splashproof case, then the Powercore modules will make your day. They allow you to build an electronic system from the ground-up, using Blink Marine keypads as input interface.

PC21B

  • 12V or 24V nominal input voltage

  • 150Ampere total PME input current carrying capability

  • 22 switched circuits.

  • Momentary, toggle, and time-out functions.

  • Pulse-width modulation of output voltage for dimming capability on 3 circuits.

  • 22 circuits, each rated up to 15A.

  • 2 complete H-Bridge circuits for driving reversible motors

  • Parallelable output increases current rating.

  • An electronic circuit breaker protects every circuits. The current ratio for each circuit can be set independently.

  • Remote reset of any output circuitry fault through keypad.

  • Input undervoltage lock down.

DISCOVER

PC10

  • 12V or 24V nominal input voltage

  • 100A total PME input current carrying capability

  • 12 switched circuits

  • Momentary, toggle, and time-out functions.

  • Pulse-width modulation of output voltage for dimming capability.

  • 3 circuits rated up to 20A maximum continuous load, 9 circuits rated up to 15A.

  • 2 complete H-Bridge circuits for driving reversible motors

  • Parallelable output increases current rating.

  • An electronic circuit breaker protects every circuits. The current ratio for each circuit can be set independently.

  • Remote reset of any output circuitry fault through keypad.

  • Input undervoltage lock down.

Discover

PC20

  • 12V or 24V nominal input voltage

  • 150Ampere total PME input current carrying capability

  • 22 switched circuits.

  • Momentary, toggle, and time-out functions.

  • Pulse-width modulation of output voltage for dimming capability.

  • 5 circuits rated up to 20A maximum continuous load, 17 circuits rated up to 15A.

  • 4 complete H-Bridge circuits for driving reversible motors.

  • Parallelable output increases current rating.

  • An electronic circuit breaker protects every circuits. The current ratio for each circuit can be set independently.

  • Remote reset of any output circuitry fault through keypad.

  • Input undervoltage lock down.

Discover

More details

Discover the products of the PowerCore series and find out more details.

Discover
PRE-SALES, TECHNICAL INFO OR GENERAL SUPPORT