PKP-2300-SI-FR
PKP-2300-SI-FR is a compact keypad based on CAN protocol. It comes equipped with six keys. The keypad is water and dust resistant, and can be installed both inside and outside the cockpit. The PKP-SI-FR (full rubber) Series has a solid rubber key face instead of a removable insert. It is a production based unit where the icon design remains the same, saving installation time not having to populate inserts. The PKP-SI-FR Series also allows for a larger surface area for the icon from 14mm dia to an increased 18mm dia.
SHOP NOWSOFTWARE FEATURES
Assign any valid CAN and RS485 address to the keypad. Communicate on either BUS simultaneously.
Keypads no longer have to be pre-programmed to a specific address. This enables customers that work in applications in the field without access to a GUI to use any replacement keypad on-hand. The keypad can be configured to automatically announce its address and accept a new address assignment as appropriate.
The keypad can send messages to the BUS indicating a button press or a button release event has occurred. This confirmation allows digital systems to have the same input acknowledgements as that of the latching position of a mechanical switch.
The keypad sends a continuous broadcast of messages indicating the press or release status of each button at that instance. The frequency of these messages can be adjusted in a wide range.
The keypad sends a continuous broadcast of messages indicating it is functioning correctly. The frequency of these messages can be adjusted in a wide range.
Fully compliant with Device Profile 401d.
HARDWARE FEATURES
SPECIFICATIONS FOR STANDARD KEYPADS
ELECTRICAL
| Supply Voltage | 12-24Vdc Nominal (8-32VDC) |
| Standby Current | <50 mA |
| Communication BUS | RS485, CANopen, J1939 |
| MTBF | 239870 hours (in accordance with MIL-HDBK-217 – operating environment ground mobile) |
MECHANICAL
| Connector | Deutsch DT04-4P |
| Switch Life | 3 million operations |
| Mounting Studs | #10-32 Steel |
| Keypad | Silicone rubber with polyurethane hardcoat |
| PC Board | 1,6mm thick, Nema Grade FR-4, double clad with 1oz copper |
| Operating Temperature | -40°C to +70°C |
| Storage Temperature | -40°C to +85°C |
| UV Protection | UVB 400 hours |
| Salt Spray | Per ASTMB117 |
| Chemical Resistance | Deet, Engine Cleaner, Isopropyl Alcohol, Suntan Lotion, Multi-Purpose Cleaner, Orange Citrus Cleaner, Muriatic Acid |
| Ingress protection Rating | IP67/NEMA6/IP69K |
| Weight | 140 gr (Inserts excluded) |
