PC10
The Power Management Unit is the brain of the system. It receives requests from switches or keypads and handles these commands based on the current state of the system. The output may be the activation/deactivation of a circuit or starting a timer function. The PowerCore then sends status data from system to keypads to turn on/off the LED indicators and backlighting.
SPECIFICATIONS FOR PC10 SOLID STATE POWERCORE MANAGEMENT ENCLOSURE
ELECTRICAL
Supply Voltage | 12V and 24V Nominal Voltage (8-32VDC) |
Standby Current | <30mA per PME |
Load current | Max 20A |
Input current | 100A max |
Communication BUS | RS-485 between keypad and PME CAN Bus Slave |
Circuit protection | electronic overcurrent protection and automotive mini blade fuse |
MECHANICAL
Connector | Molex MX150L #19427-0049 & 19427-0032 |
Mating connector | Molex MX150L #19418-0030 & 19418-0004 |
Housing | ALLOY 6060 and ZA4C1 |
Seal | TPV 8211-75 |
Power stud | Amphenol surlock plus series |
PC Board | 1,6mm thick, Nema Grade FR-4, Double clad with 3oz copper |
ENVIRONMENTAL
Operating Temperature | -20°C to +85°C |
Storage Temperature | -40°C to +85°C |
Humidity | 0 to 98% (no condensation) |
Ingress protection Rating | IP65 |
FEATURES
Circuits | 12 |
Size mm connectors incl. | 230 x 170 x 86 |
Remote current trip reset | Standard on all outputs |
System reset | Optional |
Status indicator | Standard |
By-pass | 4 outputs |
Low volt sense & lock down | Optional |
Pull down | 4 outputs |
“H” Bridge capability | 2 complete “H” bridges available |
Level sense input | 8 inputs |
Dimming/PWM Features | Available on 10 outputs |
Circuit status monitoring | Optional |
Field re-programmable | Optional |
External status communication on the bus | Optional |
N.O. relay contact | Optional |