PKP-2300-SI-FR is a compact keypad based on CAN protocol. It comes equipped with six keys. The keypad is water and dust resistant, and can be installed both inside and outside the cockpit. The PKP-SI-FR (full rubber) Series has a solid rubber key face instead of a removable insert. It is a production based unit where the icon design remains the same, saving installation time not having to populate inserts. The PKP-SI-FR Series also allows for a larger surface area for the icon from 14mm dia to an increased 18mm dia.SHOP NOW
Assign any valid CAN and RS485 address to the keypad. Communicate on either BUS simultaneously.
Keypads no longer have to be pre-programmed to a specific address. This enables customers that work in applications in the field without access to a GUI to use any replacement keypad on-hand. The keypad can be configured to automatically announce its address and accept a new address assignment as appropriate.
The keypad can send messages to the BUS indicating a button press or a button release event has occurred. This confirmation allows digital systems to have the same input acknowledgements as that of the latching position of a mechanical switch.
The keypad sends a continuous broadcast of messages indicating the press or release status of each button at that instance. The frequency of these messages can be adjusted in a wide range.
The keypad sends a continuous broadcast of messages indicating it is functioning correctly. The frequency of these messages can be adjusted in a wide range.
Fully compliant with Device Profile 401d.
P67/IP69K waterproof rating
Guaranteed to be dust tight and sealed against water immersion to a depth of 1 meter for up to 1 hour. The IP69K rating provides protection against high pressure water at high temperature spray downs.
UVB 400 hours: Keypad is highly resistant to deterioration caused by exposure to sunlight.
Membrane compensation valve
Self compensate the internal pressure within the keypad, alleviating mechanical stresses that can be produced by shifts in external temperatures.
The keypad’s symmetrical design
and spacing between keys makes it easier to install multiple keypads alongside one another.
LED state & status configurable
Vertical or horizontal mount
LED backlit icons
Multicolor indicator rings
Laser etched icons
ON/OFF, momentary, toggle & scroll
Hundreds of stock icons to choose from
Change CAN or RS485 addresses independently
Periodic status transmission
Event status transmission
Address claim transmission
RS485, CANopen and J1939
Programmer’s manual available to help support plug-and-play reconfigurability
SPECIFICATIONS FOR STANDARD KEYPADS
|Supply Voltage||12-24Vdc Nominal (8-32VDC)|
|Standby Current||<50 mA|
|Communication BUS||RS485, CANopen, J1939|
|MTBF||239870 hours (in accordance with MIL-HDBK-217 – operating environment ground mobile)|
|Switch Life||3 million operations|
|Mounting Studs||#10-32 Steel|
|Keypad||Silicone rubber with polyurethane hardcoat|
|PC Board||1,6mm thick, Nema Grade FR-4, double clad with 1oz copper|
|Operating Temperature||-40°C to +70°C|
|Storage Temperature||-40°C to +85°C|
|UV Protection||UVB 400 hours|
|Salt Spray||Per ASTMB117|
|Chemical Resistance||Deet, Engine Cleaner, Isopropyl Alcohol,
Suntan Lotion, Multi-Purpose Cleaner,
Orange Citrus Cleaner, Muriatic Acid
|Ingress protection Rating||IP67/NEMA6/IP69K|
|Weight||140 gr (Inserts excluded)|