PKP-3500-SI
PKP-3500-SI is a compact keypad based on CAN protocol. It comes equipped with fifteen keys with interchangeable 15mm inserts. The keypad is water and dust resistant, and can be installed both inside and outside the cockpit. RGB led lights and the ease with which icons can be switched in and out make it possible for the user to customize each key in a wide range of variations.
SHOP NOWFirst introduction to the PKP Series Keypad?
Here is a short product overview video.
SOFTWARE FEATURES
Assign any valid CAN and RS485 address to the keypad. RS485 protocol is available on request.
Keypads no longer have to be pre-programmed to a specific address. This enables customers that work in applications in the field without access to a GUI to use any replacement keypad on-hand. The keypad can be configured to automatically announce its address and accept a new address assignment as appropriate.
The keypad can send messages to the BUS indicating a button press or a button release event has occurred. This confirmation allows digital systems to have the same input acknowledgements as that of the latching position of a mechanical switch.
The keypad sends a continuous broadcast of messages indicating the press or release status of each button at that instance. The frequency of these messages can be adjusted in a wide range.
An online set-up system makes it possible to select and design your own prototype, then order it directly on blinkmarine.com.
The keypad sends a continuous broadcast of messages indicating it is functioning correctly. The frequency of these messages can be adjusted in a wide range.
Fully compliant with Device Profile 401d.
HARDWARE FEATURES
SPECIFICATIONS FOR STANDARD KEYPADS
ELECTRICAL
| Supply Voltage | 12-24Vdc Nominal (8-32VDC) |
| Standby Current | <50 mA |
| Communication BUS | RS485, CANopen, J1939 |
| MTBF | 173498 hours (in accordance with MIL-HDBK-217 – operating environment Ground Mobile) |
MECHANICAL
| Connector | Deutsch DT04-4P/Amphenol AT04-4P |
| Switch Life | 3 million operations |
| Mounting Studs | #10-32 Steel |
| Keypad | Silicone rubber with polyurethane hardcoat |
| PC Board | 1,6mm thick, Nema Grade FR-4, double clad with 1oz copper |
| Operating Temperature | -40°C to +70°C |
| Storage Temperature | -40°C to +85°C |
| Thermal Shock | -40°C to +85°C According to table 2 of ISO16750-4 |
| UV Protection | UVB 400 hours |
| Salt Spray | Per ASTMB117 |
| Chemical Resistance | Deet, Engine Cleaner, Isopropyl Alcohol, Suntan Lotion, Multi-Purpose Cleaner, Orange Citrus Cleaner, Muriatic Acid |
| Ingress protection Rating | IP67/IP69K |
| Weight | 360 gr (Inserts excluded) |
